The Unit 3 Problem Set has four kinds of problems. Each module below explores one problem, has you solve it, then gives you a new one to try. You choose how much help you get.
A charge sits at the origin and a charge sits at . Find the electric potential at P, . Then find the work needed to bring a third charge, , from far away to P, and the potential energy of all three charges together.
On paper, draw the two charges and P. Mark the distance from each charge to P.
In Unit 2 you'd draw a field arrow from each charge at P. Do you need arrows this time?
No arrows. Potential is energy per coulomb, and energy has no direction. Each charge contributes at P, a number that carries the sign of the charge. All you need is each distance, and the three charges' positions make a 3-4-5 triangle, so P is 0.500 m from .
carries more charge than , and it's negative. Is the potential at P
Slide P up the -axis. The bars show each charge's potential at P and their sum.
Move P up and watch the two bars.
The potential at P is what each coulomb would gain or lose there. Multiply by the charge you bring in and you have the work. The energy of the whole group counts every pair of charges once.
Both equations are on your Formula Sheet. In Part 2, you'll put them together.
A thin ring of radius carries . Point P sits on the ring's axis, from its center. Find the electric potential at P, then use it to find the electric field at P.
On paper, draw the ring, its axis and P. Pick one small piece of the ring and draw the line from it to P. Then pick a second piece on the opposite side.
How do the two lines compare?
Every piece of the ring is the same distance from P, . For the field in Unit 2, you'd split each piece's arrow into parts and cancel the sideways ones. Potential has no direction, so each piece adds a plain number, , and nothing cancels.
Along the axis, the potential is largest at the ring's center, where every piece is closest. Where along the axis is the field strongest?
Slide P along the axis. The graph shows the potential at each point. The field is the slope of that curve, with its sign flipped.
Slide P all the way to the center, then back out.
Find the potential with one integral, adding numbers instead of arrows. Then take its derivative to get the field.
Both equations are on your Formula Sheet. In Part 2, you'll pick them out and work them through.
A spherical capacitor is a metal sphere of radius inside a metal shell of radius , with vacuum between them. It is charged to . Find its capacitance. Then find the energy it stores two ways: from the capacitor's charge and voltage, and by adding up the energy stored in the field between the spheres.
On paper, draw the two spheres in cross-section. Put on the inner sphere and on the outer one. Draw a few field arrows.
Where is there a field, and which way does it point?
The field points outward, from the positive sphere toward the negative shell, and it exists only between them. A Gaussian sphere inside the inner metal encloses no charge. One outside the shell encloses . Between the spheres, a Gaussian sphere of radius encloses , so the field there is the field of a point charge, and it weakens as grows.
The capacitor's energy is stored in the field between the spheres. Where is most of it?
Slide the boundary out from the inner sphere. The shaded region holds the share of the energy shown below. The graph shows how much energy each thin shell holds, per millimeter of radius.
Slide the boundary out until it holds half the energy.
Capacitance is charge per volt. Find the field with Gauss's law, integrate it across the gap for the voltage, and divide. Then the energy comes out two ways: from and , or by adding up the energy density in thin shells.
These equations are on your Formula Sheet, with Gauss's law and the volume elements from Unit 2. In Part 2, you'll use all of them.
Capacitors and are connected in series, and that pair is connected in parallel with . The network sits across a battery. Find the equivalent capacitance and the charge and voltage on each capacitor. Then a dielectric with fills while the battery stays connected. How much more charge does the battery deliver?
On paper, draw the battery and the three capacitors.
Which capacitors must carry the same charge? Which must have the same voltage?
The bottom plate of , the top plate of and the wire between them touch nothing else, so their charge must still add to zero. If one plate holds , the other holds . The two capacitors carry the same charge, and their voltages add to 24.0 V. connects straight across the battery, so it has the full 24.0 V.
In the series pair, which capacitor has more voltage across it?
Fill one capacitor at a time with the dielectric and watch every capacitor's charge and voltage. The battery stays connected the whole time.
Start with no dielectric. Compare the voltages across C₁ and C₂.
Reduce the network one group at a time, then work back out with .
A dielectric multiplies one capacitor by . Then reduce the network again. All of this is on your Formula Sheet.