The Unit 10 Problem Set has five problems of four kinds. Each module below explores one kind, has you solve it, then gives you a new one to try. You choose how much help you get.
In the diagrams, electric fields are orange, magnetic fields are purple, currents and directions of travel are blue, and forces are magenta.
A camera flash charges its capacitor with a steady 2.00 A. Model the capacitor as two circular plates of radius 4.00 cm with a small gap. While it charges, find the rate at which the electric field between the plates grows, the displacement current between them, and the magnetic field 2.00 cm and 8.00 cm from the axis.
On paper, draw the two plates from the side, with the wire coming in on each side. Mark the current in the wires, and the electric field between the plates growing as charge piles up.
No charge crosses the gap. Does that mean there is no magnetic field circling the space between the plates?
The magnetic field circles the gap just as it circles the wire. Maxwell's displacement current, the permittivity times the rate of change of electric flux, stands in for the current that stops at the plates.
Between the plates, where no charge flows, the magnetic field 2.00 cm from the axis is
Move the distance from the axis. The graph shows the magnetic field between the plates, inside and beyond their edge.
Start inside the plates, then move past their edge.
The field between the plates is the charge per area over the permittivity, so the electric flux through the plates' area is the charge over the permittivity. Its rate of change times the permittivity is the displacement current, which equals the current in the wires. A circle inside the plates encloses only part of it.
Beyond the edge, the circle encloses all of it, and the field falls off as one over the distance, just like a wire's. The Ampère-Maxwell law and the displacement current rows are on your Formula Sheet. In Part 2, you'll solve the camera flash.
A Wi-Fi router broadcasts at 2.40 GHz. Near your laptop, its signal is a plane wave traveling in the direction with and . Find the wavelength, wave number and angular frequency, the magnetic field's amplitude and direction, and write the magnetic field as a function of position and time.
On paper, draw an axis for the direction of travel. Sketch the electric field as arrows along that rise and fall along the axis.
Which way must the magnetic field point so that it is perpendicular to both the electric field and the direction of travel?
Both fields are perpendicular to the direction of travel and to each other, and they peak at the same places. The cross product of the electric field with the magnetic field points the way the wave moves.
The electric field points in the direction and the wave moves in the direction. At that spot the magnetic field points in the
Move through time and switch the direction of travel. The diagram shows the electric and magnetic fields along the wave.
Move through a period, then reverse the direction of travel.
The speed of light links the wavelength and frequency and also the two field amplitudes. The cross product fixes the direction of the magnetic field once you know the electric field and the direction of travel.
The speed of light and field ratio rows are on your Formula Sheet. In Part 2, you'll solve the Wi-Fi wave.
A solar sail spacecraft rides on sunlight. Just outside Earth's atmosphere, sunlight has an intensity of 1,360 W/m². Find the amplitudes of its electric and magnetic fields and its average energy density. Then find the force sunlight exerts on a 10.0 m² sail that reflects it straight back.
On paper, draw sunlight arriving at a flat sail face-on. Draw the force on the sail if it absorbs the light, and then if it reflects the light straight back.
When light bounces back, how does its change in momentum compare with when it is simply absorbed?
Absorbed light gives up its momentum. Reflected light reverses its momentum, so the change is twice as large, and so is the push.
Compared with a black sail that absorbs all the sunlight, a mirror sail of the same size feels a force that is
Move the sail closer to or farther from the Sun, and switch between an absorbing and a reflecting sail.
Change the distance, then switch the sail's surface.
Intensity is the Poynting vector averaged over a cycle, which brings in a factor of one half. From the intensity you get the field amplitudes, the energy density and the pressure.
Intensity falls off as the square of the distance from a source that spreads its power in all directions. The intensity and radiation pressure rows are on your Formula Sheet. In Part 2, you'll solve the solar sail.
A kitchen is full of electromagnetic waves. Find the missing wavelength or frequency for each, and name its band: the 2.45 GHz waves in a microwave oven, the 101.1 MHz station on the radio, the 2.00 µm infrared glowing from a toaster's coils, and the 650 nm red light on the stove's clock.
On paper, draw a long arrow for increasing frequency. Mark radio, microwave, infrared, visible, ultraviolet and X-rays along it in order.
If frequency increases along your arrow, which way does wavelength increase?
Every one of these waves travels at the speed of light, so frequency times wavelength is always the same. Higher frequency means a shorter wavelength.
Which has the longer wavelength: a microwave oven's 2.45 GHz waves or a Wi-Fi router's 5.00 GHz band?
Move along the spectrum. The readouts give the frequency, wavelength and band, with an everyday example.
Sweep from radio up to X-rays.
Every electromagnetic wave in vacuum travels at the same speed, so one equation turns any frequency into a wavelength. The band is a label for where it falls.
Band boundaries differ a little from source to source, so the problem set gives the ones to use. The speed of light row is on your Formula Sheet. In Part 2, you'll solve the kitchen.